[. . . ] If you want to scan another photo, place it on the document table, close the document cover, then click Scan More. Otherwise, click Finish. Instructions for using the Smart Panel application appear here. Click a file name if you want to change it. Note: For help with PhotoImpression, click the question mark in the upper right corner of the screen. Using the Scanner Buttons The scanner buttons work with EPSON Smart Panel to provide shortcuts to common scanning functions. [. . . ] Connect the AC adapter to the DC inlet on the back of DC inlet the scanner. Plug the other end of the power cord into an electrical outlet. Safety Instructions Connect this end of the USB cable to your computer. transportation lock USB port AC adapter Read all these instructions and save them for later reference. Follow all warnings and instructions marked on the scanner. c power cord The scanner turns on and the ] Start button comes on green. c Caution: It is not possible to change the AC adapter's input or output voltage. If the label on the AC adapter does not show the correct voltage, contact your dealer. Whenever you unplug the scanner, wait at least 10 seconds before plugging it back in. Open the document cover and make carriage sure the fluorescent lamp on the (in the home position). Note: To turn off the scanner, unplug the power cord from the electrical outlet. The scanner may not work properly if you use a USB cable other than the one supplied by EPSON, or if you connect to the computer through more than one hub. The fluorescent lamp turns off if you do not use the scanner for about 15 minutes. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SEIKO EPSON CORPORATION. The information contained herein is designed only for use with this EPSON scanner. EPSON is not responsible for any use of this information as applied to other scanners. Neither SEIKO EPSON CORPORATION nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by the purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U. S. ) failure to strictly comply with SEIKO EPSON CORPORATION's operating and maintenance instructions. SEIKO EPSON CORPORATION shall not be liable for any damages or problems arising from the use of any options or any consumable products other than those designated as Original EPSON Products or EPSON Approved Products by SEIKO EPSON CORPORATION. SEIKO EPSON CORPORATION shall not be held liable for any damage resulting from electromagnetic interference that occurs from the use of any interface cables other than those designated as EPSON Approved Products by SEIKO EPSON CORPORATION. [. . . ] Never disassemble, modify, or attempt to repair the AC adapter, power cord, scanner, and option by yourself except as specifically explained in the scanner's guides. Do not insert objects into any openings as they may touch dangerous voltage points or short out parts. Beware of electrical shock hazards. Caution: Unplug the scanner and the AC adapter, and refer servicing to qualified service personnel under the following conditions: The power cord or plug is damaged; liquid has entered the scanner or the AC adapter; the scanner or the AC adapter has been dropped or the case damaged; the scanner or the AC adapter does not operate normally or exhibits a distinct change in performance. [. . . ]